help with trail tech x2 halogen install

Gday, new here.
i live in Australia and am installing the trail tech halogen x2 however i am at a lost to connect power and have lights working.
i have installed a RS stator, battery and rectifier/regulator. i wish to run the lights through stock light switch not trail techs kill switch set up.
want to connect TT x2 lights, horn to DC will i need an aftermarket switch?
am at a lost to what wires to connect from stock wiring to the X2 wires on back of light housing (red, yellow and black).
has anyone in Oz done this set up or have advise / ideas on a better set up.
will be installing a gps, cigarette sockets for phone charging etc aswell.
i couldnt find a xr650r x2 light so i bought the crf450r light, which the only difference between lights is the wiring harness for TT kill switch. (my thinking)
any help would be great.
cheers.

Read tru this
http://advrider.com/forums/showthread.php?t=421789&page=71

I am sorry but i am too tired to think , and it is 2.20 in the morning